Screenshots of Mobile-Tuner 1.2
Menu
After launching Mobile-Tuner you get to the menu. From here you can call all the features of Mobile-Tunerby. By using the direction keys you move the focus. Calling a function is performed by pressing the selection button.
Screen tuner
Use the chromatic tuner to keep your instrument in tune. Please follow the instructions.
Screen metronome
The metronome shows you the pace of a piece of music.
By pressing the navigation keys "up" and "down" the
focus is moved. By pressing the select button you can
start/stop the metronome if the start or stop button own
the focus. If you moved to sound or vibration you can
switch sound or vibration on or off. If tempo or beats are
marked you can use the "left" and "right" keys to change
them.
Under certain circumstances the metronome does not tick in time (older phone, slow production of
midi-sound). In this case you should choose a "simple" metronome in the settings (see below). The
simple metronome does not support sound or vibration settings nor blinking.
Note: some S60 Phones (Nokia) have problems with the vibration settings.
Screen keyboard
In the keyboard screen Mobile-Tuner simulates a piano. Default note is pitch a (440 Hz). By the direction keys "left" and "right" you move the scale up and down. The tone is played, if you press the select button.
Screen settings
In the settings screen you can set your preferences for Mobile-Tuner.
You can choose:
- Language: english, german
- Soundpattern of the metronome:
There are several sound patterns you can select from: Piano 1 to 4 and Drums 1 to 6. For this patterns the sound is based on midi. On phones, which do not or do not very well support midi sound production, you should activate one of the "simple" metronomes. - Speaker volume: for metronome and keyboard
- Display of the tuner:
Note: analoge display like traditional tuners
Signal: display of frequency and signal
Spectrum: display of frequency and the frequency spectrum - Range:
Select a tuning range by selecting an octave or the range D3 to H7. - Calibration:
Change the frequency of the reference tone A4 by -48 hz to + 54 hz (440hz by default). - Autoexit:
Exit Mobile-Tuner after 5, 10 or 15 minutes automatically. You also can switch off the "Autoexit" feature.
Note: There is a problem in the operating system of S60 phones when capturing sound. So you should use the tuner function of Mobile-Tuner on a S60 phone for about maximal 15 minutes and then do a restart. In the other case there is the possibility that the phone runs out of memory. - Capture method:
memory (default): for all S60 phones and SonyEricsson phones with newer firmware
file: for SonyEricsson phones with older firmware (you have to set permission on file system to "aske once" or "never ask" when capturing to file).
Screen help
The help screen displays this instructions in short.
Screen about
The about screen reports the version of Mobile-Tuner you have installed. Additionally the remaining test period is shown, if you installed a demo version of Mobile-Tuner.


